Product ID:IONAC GRADE 6 CLASS 2
MSDS Date:10/03/2000
FSC:6810
NIIN:00-111-0567
Status Code:A
MSDS Number: CLQBW

Emergency Phone: (800) 424-9300

Info Phone: 609-893-1100

Preparer: REGULATORY AFFAIRS

Cage: 76465

Telephone: 609-893-1100

Cage: 76465

BENZENE, DIETHENYL-, POLYMER WITH ETHENYLBENZENE AND

CAS: 69011-18-3

BENZENE, DIETHENYL-, POLYMER WITH ETHENYLBENZENE AND

CAS: 69011-20-7

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Health Hazards Acute and Chronic:ROUTE OF ENTRY: EYE CONTACT CAN
PRODUCE MECHANICAL IRRITATION TO THE EYE. MAY CAUSE SKIN IRRITATION
OF HYPERSENSITIVE PERSONNEL. CHRONIC: MECHANICAL IRRITATION TO THE
EYES AND SKIN IRRITATION TO HYPER SENSITIVE PERSONNEL.
Explanation of Carcinogenicity:N/D
Effects of Overexposure:RED IRRITATED EYES, ITCHING AND FEELING THAT A
PARTICLE EXISTS BETWEEN THE EYELID AND EYE.

First Aid:FLUSH EYES AND SKIN WITH COPIOUS QUANTITIES OF WATER FOR 15
MINUTES. IF IRRITATION PERSISTS, SEE A PHYSICIAN.

Autoignition Temp:>500.C, 932.F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, OR WATER FOG.
Fire Fighting Procedures:WEAR MSHA/ NIOSH APPROVED PRESSURE DEMAND,
SELF-CONTAINED BREATHING APPARATUS. GUARD AGAINST CONTACT OF THE
PRODUCT WITH THE EYES DURING SALVAGE OPERATION.

Spill Release Procedures:SWEEP AREA OF PRODUCT, COLLECTING IN A
CONTAINER FOR DISPOSAL.

Handling and Storage Precautions:AVOID FREEZING OR PROLONGED STORAGE
ABOVE 50 DEG. C BECAUSE PRODUCT CONTAINS WATER, WHICH WILL FREEZE
AND DAMAGE PRODUCT OR DRY-OUT ALSO DAMAGING THE PRODUCT.
Other Precautions:AVOID FREEZING.

Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:SPLASH GOGGLES WHILE HANDLING ION EXCHANGE MATERIAL.
Other Protective Equipment:LONG SLEEVE SHIRTS AND LONG TROUSERS ARE
RECOMMENDED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:FLUSH PRODUCT FROM HANDS WITH SOAPY WATER. CARE
SHOULD BE TAKEN TO AVOID CONTACT WITH EYES UNTIL HANDS HAVE BEEN
COMPLETELY CLEANED. PRODUCT HAS A TENDENCY TO CLING TO SKIN DUE TO
STATIC CHARGE.
Supplemental Safety and Health
THE PRODUCT CAUSES AREAS TO BECOME EXTREMELY SLIPPERY WHEN SPILLED, AND
CAN CAUSE FALLS. SWEEP UP SPILLED MATERIAL AND TRANSFER FOR PROPER
DISPOSAL.

HCC:N1
Melt/Freeze Pt:=0.C, 32.F
Vapor Pres:17@20C FOR WATER
Vapor Density:0.62
Spec Gravity:1.2
pH:6-9
Evaporation Rate & Reference:1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID. (BEADS SOLID), SPHERICAL BEADS; SLIGHTLY
FISHY ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS NITRIC ACID.
Stability Condition to Avoid:AT TEMPERATURES ABOVE 204C DECOMPOSITION
OCCURS. EXPLOSIVE REACTIONS CAN OCCUR IN THE PRESENCE OF STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
STYRENE AND DIVINYLBENZENE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:AS SUPPLIED, NEW OR USED ION EXCHANGE RESINS
GENERALLY ARE NOT HAZARDOUS AND THEREFORE ARE NOT CONSIDERED AS
HAZARDOUS WASTES. USED RESINS MAY MEET THE REGULATORY DEFINITION OF
HAZARDOUS WASTE AS A RE SULT OF THEIR SERVICE. (REFER TO 40CFR261).
REGULATORY AGENCIES AND MANY DISPOSAL SITES MAY REQUIRE
VERIFICATION OF THE HAZARDOUS STATUS.

Toxicological Information:TOXICOLOGICALLY SYNERGISTIC PRODUCTS: N/D.
IRRITANCY OF PRODUCT: EYE AND SKIN. REPRODUCTIVE TOXICITY: N/D.
TERATOGENICITY: N/D

Transport Information:NOT REGULATED BY DOT.

SARA Title III Information:SARA SECTION 302 REPORTING: NONE SARA
SECTION 304 REPORTING: NONE SARA SECTION 313 REPORTING: NONE
CERCLA REPORTING REQUIRED: NONE. RCRA REPORTING REQUIRED: NONE

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.